TSCLT 10.0: Confucius say he hates a pussy!

I've been all off kilter here. My routine is off.


At least I can still guzzle coffee.


Found something.


I mean, besides rain . . . .


1949-packard-eight



lusciousnet_under_water_1570438729.jpg
 
It is brutal outside, when the sun has been up for a while,
I'll have to employ the salt melt.
 
Oh the irony. Go to the first post in the "pandemic" thread and re-read the article. Warm and dry is the enemy of the Wuhan Flu virus so given that little factoid it's intuitively obvious that "global warming" is to be encouraged. :D
 
One thing has struck me this morning,
the same idiots who supported the political board
are fucking ignoring it in order to placate their need to hate Trump.
There seems to be no possible topic that does not justify taking a shot at Trump.

I think 80% of Democrats are mental morons who never got past their adolescent phase.
 
But, at least it is clear and the sun is rising.
The morning local weather called for mainly cloudy,
but we can really use a little sun on the ice. If this keeps up,
I might not even have to use the ice melt which isn't all that good for the concrete.
 
One thing has struck me this morning,
the same idiots who supported the political board
are fucking ignoring it in order to placate their need to hate Trump.
There seems to be no possible topic that does not justify taking a shot at Trump.

I think 80% of Democrats are mental morons who never got past their adolescent phase.

Perhaps it's the only way they can justify their own miserable existence?

I get a kick out of it, it demonstrates how shallow they and their lives are.
 
Just the same, it's a pretty sad way to measure your self worth...

:)

... in fact it seems to increase proportionately with their lack of self-esteem
and feelings of inferiority. After all, I'm being attacked this morning
by nothing more than a fucking welder.

I remember those guys from high school.
 
I should learn mahse'f how to fucking weld. I ain't done it afore, but whatdahfuck?


Runamok . . . .


The 'lectricity went out for awhile. I actually called it in, and they said it was an area-wide outage. I felt less special or oppressed afterward. It came back on about half an hour ago.


Got some shit on the move around here this morning. It's snack-time - leftover Numbah Wun.


36cae96fccb29bc0566bc574ba405901.jpg



4882393624_4c3c470c32_b.jpg



lusciousnet_jana_1633745669.jpg
 
Good Morning!
Woke up to a little bit of snow this morning. Just enough to make everything look pretty.
I discovered I should have bought dog food when I was in town yesterday, so I went to the feed store this morning when they opened.

Oh, and the cookies I baked last night are yummy
 
Why should you be surprised?


Misc. shit going on around here. Rounding up some more crap to be re-homed.


Or tossed out into the crapster.


Lit a bit of josh for those who need it . . . .


eac6bd554c091a4ca8e6f082b39ae765.jpg



17a5e56edb53dcc529c0fdd13247637c.jpg



tumblr_o7jkttdkSB1sv7pqto1_1280.jpg
 
Welding is something I need to relearn/practice. I've done it before (poorly mostly). Got to be fairly decent wire welding (MIG) light steel. I need to learn and practice stick welding and MIG on heavier stock.
 
Took a welding course once. I dropped it halfway through. The "instructor" kept saying that the process should "sound like bacon fryin'."


My guess is, he cooked his bacon too fast and his was a shitty analogy.


Besides, it doesn't sound like bacon frying anyway . . . .


856218acc6b9f35a1e1a18945167759d.jpg



8849f2c050b33be28a64bc5d4524cd50.jpg



34345_source_1561178457.jpg
 
Car and bike guys often weld. Another tool in the box. I keep a roll of inner shield in the 110v MIG for patches and small jobs. The nascar stickers let you know it is a kickass welding machine.
 
One thing has struck me this morning,
the same idiots who supported the political board
are fucking ignoring it in order to placate their need to hate Trump.
There seems to be no possible topic that does not justify taking a shot at Trump.

I think 80% of Democrats are mental morons who never got past their adolescent phase.

STFU, hypocritical idiot. Every single thread you've made there takes a jab at anyone but 45.

Honest Joe's Honest China Reset

Has anyone failed to note that Leftists <---- hypocrisy overload here

This is going to be a fun four years
for a lot of us.
I mean, with the shoe on the other foot.
Offense is fun.

[I wasn't even on the Trump team and I was attacked on a day basis.]
[It was demanded that I be a defender. Will I have to defend Joe too?]


You truly are a piece of shit, AJ teh Stoopit.
 
Happy Football Is Over For The Next Six Months Monday, and congrats to TB for boldly going where no man has gone before. G.O.A.T. it is, it seems.


The weather is looking cooperative today, which is good, because it's also Road Trip Monday. The car has fresh oil, checked fluids, and a full tank. Just a matter of loading it.


Crashed early and woke super early. Might as well hit the road early, I reckon.


After a shower and some moar coffee . . . .


65c0f2cf6b4152d5177f2d3d04112dc9.jpg



14.jpg



janadefi-vol12-set01-15.jpg
 
Had a torch rig in another life. Used it for cutting mostly and some heating up of frozen bits.


I remember watching an old guy who was all excited about a '41 Caddy until he discovers that the A pillars were rusted out at the floor. He didn't know what to do about it. Not sure if that killed his drive or whether it was the broken-off head bolt. Likely the bot' uv 'em.


I have a grinder collection these daze for cutting.


I really should buy a rural chink of dirt and build a barn on it . . . .


a5fd6fa9671dbb36b7d149c8a80abd41.jpg



lusciousnet_legs_spread_848522465.1024x0.jpg
 
Has puk ever welded or had anal? I think not. I mean the penetrator. I'm sure he was on the receiving end.

Sorry, back to the thread.

First car? '63 Impala, two door. 'Don't sell it they said ', they were right. Regrets to this day.
 
Had a torch rig in another life. Used it for cutting mostly and some heating up of frozen bits.


I remember watching an old guy who was all excited about a '41 Caddy until he discovers that the A pillars were rusted out at the floor. He didn't know what to do about it. Not sure if that killed his drive or whether it was the broken-off head bolt. Likely the bot' uv 'em.


I have a grinder collection these daze for cutting.


I really should buy a rural chink of dirt and build a barn on it . . . .

My first welding instructor repaired bullet holes in aluminum Air Force planes with a torch. Great for heating and cutting. Not so great for patching 41 Caddies.


Remember, a bad welder makes a good grinder.
 
Yeah, I've heard that.


Of course, I believe almost none of what I hear and only half of what I see, so there's that.


Car is partly loaded. Gonna collect the p000ter now.


Off to gaze at some highway . . . .


1ea9b70f7576c4e987ef99290617049b.jpg



24945228161_50f9d48305.jpg



lusciousnet_holy_moly_1499296774.jpg
 
Back
Top